KOOKYE 8 in 1 Raspberry Pi 3 Starter Kits

Byamber

KOOKYE 8 in 1 Raspberry Pi 3 Starter Kits

Raspberry Pi Board +3.5” LCD Touch Screen w/On/Off + Transparent Case + Power Adapter + USB Power Cable with Switch + HDMI TO HDMI Cable + Screwdriver +16GB TF Card

ZZDKRK2100-01

Buy from US Buy from UK Buy from DE Buy from IT Buy from FR Buy from ES
amzus amzuk

Compared to the Raspberry Pi 2, it has:
Next Generation QUAD Core Broadcom BCM2837 64bit processor.
Processor speed has increased from 900MHz on Pi 2 to 1.2Ghz.
BCM43438 WiFi on board; Bluetooth Low Energy (BLE) on board.
Upgraded switched power source up to 2.5 Amps (can now power even more powerful devices over USB ports).

Like the Pi 2, it also has:
1GB RAM
40pin extended GPIO
4 x USB 2 ports
4 pole Stereo output and Composite video port
Full size HDMI output
CSI camera port for connecting the Raspberry Pi camera DSI display port for connecting the Raspberry Pi touch screen display
Micro SD port for loading your operating system and storing data
Upgraded switched Micro USB power source (now supports up to 2.5 Amps)
The same form factor as the Pi 2 Model B, – the only difference is the location of the onboard LEDs

Specification:
Processor Chipset:
Broadcom BCM2837 64Bit Quad Core
Processor Powered Single Board Computer running at 1.2GHz
Processor Speed: QUAD Core @1.2GHz
RAM: 1GB SDRAM @ 400 MHz
Storage: Micro SD
USD2.0: 4XUSB Ports
Max Power Draw/voltage: 2.5A @5V
GPIO: 40 pin
Ethernet Port :Yes
Wifi: Built in
Bluetooth LE: Built in

-3.5” LCD Screen Display Monitor–
Support Iuput Resolution : between 480*320 to 1920*1080 resolution, 3:2 recommended.(As the original resolution of this LCD screen is 480*320, so the screen can just display in 480*320 resolution with 1920*1080 resolution input.)
Refresh up to 60 frames per second
Support systems: Only support raspbian now (we are developing new dirver for the system kali, ubuntu,Retrope, PiPlayer, windows10)
Perfect Compatible with Raspberry Pi 2B 3B
Size: 86x56mm

Installation guide about customized image which is combinated 3.5″ LCD driver and a fresh OS (support OS Raspbian, Kali, Ubuntu): http://kookye.com/?p=3655
Installation guide about touch driver for Existing OS(Just support Raspbian, Ubuntu)– http://kookye.com/?p=4130

Note:
1) If the display can’t show whole, please change the config.txt file in SD card, find the line hdmi-cvt and change the resolution in this line. After changing config.txt, save and restart Pi.
2) the 3.5″ LCD will sleep about 5 minuter without action, you can set the sleep function according to the link: http://kookye.com/?p=4411

Package include:
1 x Raspberry Pi 3 Board
1x LCD Screen
1 x 16GB Micro SD / TF Card
1 x 5V 2.5A USB Power Adapter
1 x USB Power Cable with ON/OFF Switch
1 x HDMI To HDMI Converter
1 x Screwdriver

About the Author

amber administrator

You must be logged in to post a comment