Use Arduino drive tilt switch


Use Arduino drive tilt switch


In this project, we will use Arduino to get signal from tilt sensor. When sensor is tilt, Arduino will turon LED otherwise the LED will turn off.

2)Devices and parts:

Arduino UNO R3 x 1;
USB cable x 1;
Tilt switch sensor x 1;
Jump wires.

Circuit graph


4)Download sample code from following link:

Get tilt switch Arduino sample code here

Load above code into Arduino IDE and you will see result as following:


Put tilt sensor in horizon position,LED is off. See following picture:

Tilt the sensor in some angle, LED is on. see following picture:


About the Author

amber administrator

You must be logged in to post a comment