Author Archive:amber


KOOKYE Universal Starter Kits V2 for Arduino Beginner

KOOKYE Universal Starter Kits for NodeMCU IoT and Arduino Beginner

This Arduino Starter Kit is a very good do-and-learn package for starter to study MCU(microcontroller unit) programming. With this Starter Kit, you are able to do and learn many Arduino lab project such as imitating pedestrian traffic light with button and LEDs, displaying text string with Liquid Crystal Display(LCD) and using Potentiometer to control servo motor, etc.

Also you can learn the basic concepts of buttons, resistors, sensors,IR remote control and receivers, how to use sensors to detect environment(i.e light, temperature), and how to use 74HC595 Shifting Register IC to extend Arduino Digital Ports.

Every project in this starter kit has detailed circuit graph, step-by-step tutorial and fully-tested Arduino sample codes which can save lots of your research time and speed up your learning progress.

After you finishes all the projects in this kit, you are no more a beginner! You become an intermediate Arduino player!

Buy from US Buy from UK Buy from DE Buy from IT Buy from FR Buy from ES Buy from JP
amz amzuk AMAZON-jp


Package Included:

P1: Flashing LEDs TUTORIAL
P2: Using photoresistor to detect light TUTORIAL
P3: Use potentiometer to control a servo TUTORIAL
P4: Decode IR Controller with IR Receiver TUTORIAL
P5: TMP36 temperature sensor project TUTORIAL
P6: Control traffic lights with a push button TUTORIAL
P7: Tilt Sensor Test Project TUTORIAL
P8: 16×2 I2C LiquidCrystal Display(LCD) TUTORIAL
P9: Serial to Parallel Shifting-Out with a 74HC595 TUTORIAL
P10:Display 4-digit numbers on a 5643 Dixie LED tube TUTORIAL
P11:Display 1-digit 0 to 9 in 7-seg Nixie LED Tube TUTORIAL
P12:Project to Test BYJ48 Stepper Motor TUTORIAL
P13:Use potentiometer to control a servo TUTORIAL
P14:Test Piezo Buzzer TUTORIAL
P15:How to read resistor color code TUTORIAL
P16:Use DHT11 detect the temperature and humidity TUTORIAL
P17:Ultrasonic distance sensor project TUTORIAL
P18:Dot matrix LED display project TUTORIAL
P19:Infrared obstacle avoidance test TUTORIAL

Package Included:

  • Pictures Content
  • UNO R3 1* UNO R3 Board and cable(fully compatible with Arduino UNO R3)
  • led light 24* LED(6*white, 6*Red, 6*Yellow, 6*Green)
  • DKST100100-4-Digit led 1* 4-Digit 7 segment LED display
  • DKST100100-1-Digit led 1* 1-Digit 7 segment LED display
  • Photoressitor 3* Photoressitor (Light sensor)
  • Potentionmeter 1* Potentionmeter(10k adjustable resistor)
  • 74HC595 Shifting register 1* 74HC595 Shifting register
  • I2c display 1* I2c display(16*2)
  • Stepper Motor+Bridge 1* Stepper Motor+Bridge
  • Piezo Buzzer 1* Piezo Buzzer
  • SG90 1* SG90 servo motor
  • Tilt Sensor(SW-520D) 1* Tilt Sensor(SW-520D)
  • DHT11 Humidity sensor 1* DHT11 Humidity sensor
  • DKST100100-TMP36 1* Temperature sensor TMP36
  • HC-SR04 1* Ultrasonic module HC-SR04
  • Obstacle avoidance 1* Obstacle avoidance sensor
  • Infrared remote 1* Infrared remote controller and receiver
  • Push buttons 5* Push buttons
  • Acrylic base 1* Acrylic base plate
  • breadboard 1* Solderless prototype breadboard
  • Resistors Resistors:
    15* Resistors(200 ohm)
    15* Resistors(470 ohm)
    15* Resistors(10K ohm)
  • jump wire Jumper Wires:
    40* 12cm male-male jumper
    15* 15cm male-male jumper
    5* 20cm & 25cm male-male jumper
    8* 20cm female-female jumper

Tutorial for NodeMCU IoT Kit—

Buy it on amazon US: KOOKYE Universal Starter Kits for Arduino Beginner (19 Projects)

Buy it on amazon UK: Arduino Universal Starter Kit for Arduino Beginner (19 Projectors)

Buy it on amazon Japan: Arduino学習キット 様々なマイコン実験や開発用電子部品キット Arduino UNO R3互換ボード LCDキャ…


Installation for 3.5 Inch Raspberry Pi Case

Installation for 3.5 Inch Raspberry Pi Case: Read More


KOOKYE HDMI Extender LKV373A V3.0 Receiver + Sender ( RX+TX)

KOOKYE HDMI Extender LKV373A V3.0 RX Receiver TX Sender Over Single Cat5/5e/6 Ethernet Cable Up To 390 Feet Supports 1080P, HD Audio, Deep Color For HD DVD PS3

Transmit HDMI signal over network cable–LKV373 converts the HDMI signal to standard network signal and transfered by existing CAT5/5e/ cable to long distance,it saves your cost of rewiring greatly.
LKV373 takes the advantages of the latest transmission technology to xetend your HDMI video with the resolution up to 1080P@60Hz up to 120m/394ft over single network cable.

Buy from America Buy from Europe Buy from Japan
amzus amzuk AMAZON-jp
  • SUPER LONG DISTANCE TRANSMISSION–It enables you to extend HDMI signal over a single CAT6 up to 120m/390ft, and if connected with LAN router or switch, you can extend your HDMI signal to anywhere you want.
  • STRONGER COMPATIBLITY–It has better compatibility with HDMI source devices, display devices and net work cables. It supports DVD, PS3,STB,PC with HDMI output interface,SDTV, projector with HDMI input port, and UTP/STP CAT5/5e/ network cables.
  • UP TO 1920*1080 RESOLUTIONS–The latest V3.0 technology has improved & optimized picture quality, to bring a clearer transmission effect up to 1080 without trailing and ghosting.
  • 7*24 HOURS OF CONTINUOUS WORK–It adopt more professional industrial and ESD electrostatic protection circuit design for better heat dissipation for your industrial application.
  • FUNCTIONAL AS EXTENDER &SPLITTER–By connecting your LAN router or switch, 1 SENDER (TX) can connect with multiple receivers(RX), to be used as HDMI splitter, to meet your different installation requirements.

01 02 03 04 05 06 07 08 09

HDMI Signal:HDMI1.3, Compatible with HDCP1.2
Transport Protocol:HDbitT
Network Cable:UTP/STP CAT5/5e/6
Supports Resolutions:480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz,1080i@50/60Hz,1080p@50/60Hz
Transmission Distance:Up to 120m transmission distance for 1080P full HD over single CAT6.
CAT 80m/CAT5e 100m/CAT5 120m
Working Temperature:0℃-60℃
Power Supply: DC5V/3A

Package Contents:
1x HDMI Extender Transmitter
1x HDMI Extender Receiver
2x Adapter
1x User Manual

The Related Article: The Frequently Asked Questions about LKV373 HDMI extender