|Buy from US||Buy from UK||Buy from DE||Buy from IT||Buy from FR||Buy from ES||Buy from JP|
A complete set of servo motor,include servo,rocker and screw,360 degree unlimited rotation. Multiple combination of gear set,it could apply to your needs,such as remoto-control car ,model car, model robot,helicopter.
The signal terminal needs to be input with one 50 HZ square wave, then the duration of high level pulse, which is used to control signal cycle, can control speed and forward/backward rotation as well as stalling. The duration of high level corresponds to a speed. When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is the fastest when it is 1ms, the higher the lower, servo will stop rotating when reaching 1.5ms). When high level is 1.5 ~2ms, the servo rotates backward(The servo stops rotating when reaching 1.5ms, when the duration is closer to 2ms, the closer, the faster. The backward rotation speed, the fastest when reaching 2ms)
This servo carries meso-position adjustment potentiometer(it can only be seen by peeling off the outer cover and circuit board). We can set high level pulse at 1.5ms to observe that whether servo stops rotating. If it doesn’t stop rotating, we keep adjusting the potentiometer until it does.
Model: EAEC100300 DS04
Applies to model airplane / Model car / robot
Torque: 5.5kg/cm (at 4.8V)
Speed: 0.22sec/60°(at 4.8V)
Working voltage: 4.8v-6v DC
Current: < 1000mA Weight: 45g Dimensions: 1.57 x 1.61 x 0.78 inches (4 x 2 x 4 cm) White wire: Signal Red wire：VCC Black wire: GND The simple way to test the servo motor with arduino uno board: www.kookye.com/?p=6136
You must be logged in to post a comment