Raspberry Pi 3 starter learning Kit with Sample Projects

Byamber

Raspberry Pi 3 starter learning Kit with Sample Projects

This is a great starter kit for raspberry pi 3 (2016 version). Unlike Arduino and other micro-computer board which works on 5V voltage, New 2016 Raspberry Pi 3 CPU and I/O ports work on 3V voltage and very sensitive to current change and overheat. In order to best protect your pi 3

We also includes many common hardware components which are often used in Raspberry Pi/Arduino related DIY project.

To help beginners to easily study the Raspberry Pi hardware controlling, we designed many straight forward sample projects. All parts in these sample projects are in this kit which can save user a lot of money and time to do research. Each project has circuit graph, free sample code and video which can be easily understood.

Sample Projects List:

• How to read Raspberry Pi i/o pin diagram (GPIO pin graph)
• Output signal from Raspberry Pi GPIO pin to LED
• Mercurry Tilt switch work with Raspberry Pi
• Drive 16×2 LCD with Raspberry Pi
• Drive I2C 1602 LCD with RasPi
• Drive DHT11 Temperature Sensor with Raspberry Pi
• Drive Servo Motor with Raspberry Pi
• Using Raspberry Pi to drive motion sensor and turn on LED

The Kit Package includes:

• 1 x Raspberry Pi 3

  Raspberry Pi Tutorial

• 1 x 16GB MicroSD memory card pre-installed with NOOB

• 1 x USB MicroSD TF card reader

• 1 x USB power cable w/switch

• 1 x 5V/3A Power Adapter

• 1 x HDMI cable

• 1 x Raspberry Pi/Arduino 8-Channel TTL Logic Level Converter

• 1 x Solderless Prototype Breadboard

• 1 x GPIO to Breadboard 40-pin breakout interface

• Jumper Wires(1 x 40pin male to male 15cm,1 x 16pin female to female 20cm)

• LED (6 x Bright White, 6 x Red, 6 x Yellow, 6 x Green)

• 3 x Photoresistor(light sensor)

• 3 x Potentiometer(10kilohm adjustable resistor)

• 1 x MCP3008 A/D converter

• 5 x push buttons

• 1 x DHT11 Temperature/Humidity sensor

• 1 x Motion sensor

• 1 x Mercury tilt switch sensor

• 1 x 1602 alphanumeric LiquidCrystal Display

• 1 x I2C 1602 alphanumeric LCD

• 1 x servo motor

• 1 x Piezo Buzzer

• 1 x BMP180 Pressure/Temperature Sensor

• 1 x Relay

• 1 x Infrared Remote Controller and Receiver(VS1838B)

• Resistors (220ohm x 15pcs, 470ohm x 15pcs, 1K ohm x 15pcs,10Kohm x 15pcs)