Touch Sensor Module Project for Arduino

Byadmin

Touch Sensor Module Project for Arduino

1)Objective

Touch Switch Sensor export 0(low voltage) in normal status. When it is touched, it will export 1 (high voltage and last 12 seconds). If over 12 seconds without touching, it will export 0 again;
In this project, we will use touch switch sensor to send signal to Arduino and turn on/off LED.

2) Parts and Devices in this project：

1 x arduino UNO

1 x Touch Switch Sensor

1 x USB cable

1 x LED

Jumper wires

3) Circuit Graph

4)Sample code download link：

download toucuswitch code here

5)Result:

When you touch the sensor with hand, LED will turn on. When you remove your hand from sensor, the LED will turn off. See following pictures: