KOOKYE Servo Motor Metal Gear 180 Degree Rotation

Byamber

digital servo, metal servo, servo

KOOKYE Servo Motor Metal Gear 180 Degree Rotation

Buy from US	Buy from UK	Buy from DE	Buy from IT	Buy from FR	Buy from ES	Buy from JP

Pictures:

Features:

•  Size 40 * 20 * 43mm, Net Weight 55g, the coupler diameter 5cm;
• Structural material metal copper teeth, coreless motor, double ball bearing no load;
• Operating speed: 0.17sec / 60 degrees (4.8V no load), 0.13sec / 60 degrees (6.0V no load) ;operating current of 100mA, voltage of 3-7.2V.
• It’s universal “S” type connector that fits most receivers, General rotation angle up to 180 degrees.
• The Servo Motor include servo horn set (Arm , X , wheel, Star) ;

Specification:
Model: MG995-180  (180 Degree)
Weight: 65g
Gear Type: Metal gear
Dimension: 40×20×43mm
Stall Torque : 9.4kg/cm (4.8v)
Stall Torque :11kg/cm (6v)
Operating Speed: 0.17sec / 60 degrees (4.8V no load)
Operating Speed: 0.13sec / 60 degrees (6.0V no load)
Operating voltage: 4.8~ 6.6v
Temperature range: 0- 55deg
Dead band width: 1us servo
Wire length: 30cm
Package includes:
1 x servo with servo horn set( Arm , X , wheel, Star )

Sometimes we can not get the servo retate to 180 0r 360 degree;sometimes we can not get the servo retate clockwise or counter clockwise.

Auctally, it is the reason that the servo was not supply enough driver force. You need to connect the VCC of servo to VIN pin on UNO R3 board and power the UNO board through DC connector.

Yellow wire: S

Red wire：VCC

Black wire:  GND

The simple way to test the servo motor with arduino uno board: www.kookye.com/?p=6136