Micro Servo – SG90

Byamber

Micro Servo – SG90

6

Description

Tiny and lightweight with high output power. Servo can rotate approximately 180 degrees(90 in each direction), and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. It comes with a 3 horns (arms) and hardware.

Please note, this servo will ‘hold’ the position even when no signal is sent!

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position “0” (1.5ms pulse) is middle, “90” (~2ms pulse) is all the way to the right, “-90” (~1ms pulse) is all the way to the left.

  • Operating speed: 0.3second/ 60degree
  • Stall Torque : 1.5kg/cm
  • Temperature range: 0 ℃ to +55 ℃
  • Dead band width: 10usec
  • Operating voltage: 4.2V~6V
  • Fit for ALL kind of R/C Toys
  • Connector Wire Length: 250mm
  • Rotation degree: 180 degree
  • Dimension: 22.2 x 11.8 x32.2mm
  • Weight: 9g

SG90 Servo Motor Size

Library

Arduino library: Servo library

Examples

Arduino

Servo sweep example
Servo knob example

Servo & MQTT

Using Arduino/RFID/LCD/Servo to make sample security project

Raspberry Pi

Drive Servo Motor with Raspberry Pi

About the Author

amber administrator

You must be logged in to post a comment