MKS-TFT28 Description:
MKS TFT28 V1.2 is a Colorful Touch Screen LCD Display, suitable for many types open source 3D Printers. MKS TFT28 is suitable for many main board such as Ramps1.4 and MKS Base, MKS Gen, MKS Mini.
1)2.8 inch colorful touch screen LCD, support U disk and SD card
2)Reserved Wifi interface
3)Supports power failure renew, power failure preservation
4)Boot logo and all buttons, such as interface can be designed by ourselves
MKS-TFT28 Connecting instruction:
(1)Connect MKS-TFT28 with MKS GEN:
(2) Connect MKS-TFT28 with MKS Base:
(3) Connect MKS-TFT28 with MKS MIINI:
MKS-TFT28 Firmware setting:
Boot setting: Booting –>setting–>connecting,choose the correct Baud rate.
For the first time, Please download cardpicture_English_kookye.rar picture_English_kookyeUnzip the file: mks_pic, mks_config, mkstft28.bin, then copy to the root direction of SD card, after updating please go to >>set>>connect, the baud rate must be changed to as the same firmware and burned baud rate (otherwise MKS-TFT28 cannot control 3D printer), typically 115200. as the picture shows:
For more information such as: Communicate protocol and instruction for how to custom logo, please donwload fromMKS-TFT28 DataSheet
Buy It On Amazon UK![]() MKS TFT 2.8″ Touch Screen |
You must be logged in to post a comment
About the Author