Byamber
Use IntoRobot Nut to drive HC-SR04 sensor and send distance data to IOT cloud
1) Objective：
HC-SR04 is ultrasound distance sensor. IntoRobot Nut is a MCU board with wifi feature. In this project, we will use NUT to drive HC-SR04 sensor and send distance data to IntoRobot Cloud.
2) Parts and devices：
|
Devices
|
quantity
|
|
Nut board
|
1
|
|
HC-SR04 distance sensor
|
1
|
|
USB power adapter
|
1
|
|
USB cable
|
1
|
|
jumper wires
|
3) Circuit graph
|
Nut
|
HC-SR04
|
|
5V
|
VCC
|
|
GND
|
GND
|
|
Trig
|
D0
|
|
Echo
|
D1
|
4)Step by Step procedure:
A)Register an IntoRobot Account and add your NUT to IntoRobot cloud, for detail, please read http://kookye.com/2016/11/17/intorobot-nut-quick-start/
B)Add HC-SR04 distance sensor into you
After login to your IntoRobot account, click My devices->Demo devices->距离检测->测距仪
C)Click Fork it to my device
D) Select your Nut board from device drop down menu and click Update device
E) Click Yes on question “Write to the device?”
After compiling, you will see distance info as following:
You can also see the data in your IntoRobot Mobile App.
Click programming->Diastimeter, you can see and customize source code to meet your special requirement
amber administrator
You must be logged in to post a comment
About the Author